魏碑心思朗文词典

lateral displacement

L 开头单词

基本解释

  • [物] 横向位移，侧向位移；侧方移位

英汉例句

    双语例句

  • Lateral displacement of the warping carrier is completely controlled by the computer, with automatic positioning for each section.
    整经托架的横向位移完全由电脑控制，并且每一条均可自动定位。
  • Through the spot test, the paper studies the forced mechanism of soil anchor bolting and lateral displacement of the foundation pit.
    本文通过现场试验，研究土层锚杆支护的受力机理以及基坑壁的侧向位移。
  • Through finding, the anchor bolting process is a dynamic state to be forced, and got the variety law of anchor be forced and lateral displacement of the foundation pit.
    通过研究发现，锚杆的受力是一个动态受力过程，并且得出了锚杆受力和基坑壁侧向位移的变化规律。

词组短语

    短语

  • lateral mass displacement 侧块移位之和
  • allowable lateral track displacement 轨道允许横向位移
  • lateral ultimate displacement 水平极限位移
  • lateral deformation displacement 侧向位移
  • lateral yarn displacement motion 络纱横向位运动

专业释义

    土木建筑工程

  • 侧移

    The weaker the soil,the greater the effect of the vertical load on the lateral displacement at the pile top.
    在土质条件较好的情况下竖向荷载对桩顶侧移的有利影响不如土质条件较差时那样明显。

  • 侧向位移

    The relationships from vertical soil pressure, axial stress of anchor, lateral displacement of foundation to construction process are got by test data analysis.
    通过对试验数据的分析得出了土中竖向应力、锚杆轴向应力、基坑侧向位移与施工过程间的变化关系。

  • 水平位移
  • 侧向变形

    In order to calculate the wall’s lateral displacement, several diagrams have been cited from a F. E. M results .
    为了计算挡墙的侧向变形，本文引用一个有限元程序计算得出的图表结果。

    交通运输工程

  • 侧向位移

    So,the value of lateral displacement obtained from the inclinometer is inaccurate.
    因而,基于测斜管得到的侧向位移数值是近似的。

    地球科学

  • 侧移

    A method for evaluating foundation strength and settlement of pile foundation is presented The design principle and allowable settlement values for pile foundations is described, and the problems of negative friction and lateral displacement of pile in soft soil isdiscussed.
    本文提出了桩基强度和桩的沉降计算方法，指出不能用岩石单轴抗压强度会计算桩基强度，提出了桩基的设计原则和桩的允许沉降值，特别提到了在软土中桩的负摩擦和侧移问题。

    能源科学技术

  • 离轴量

    To ensure the accuracy of conic surface in the fabrication of off-axis aspheric section,it is important to control the current surface parameters,such as the lateral displacement,tilt angle,the paraxial radius and the conic constant.
    为了在制造过程中保证离轴非球面的光学特性,需要对其主要的面型参数进行严格控制,除了常规形式的顶点曲率半径和非球面系数外,还需要控制镜面的离轴量和离轴角。

    物理学

  • 横向位移